2.0 mega pixel wireless 150mbps ipcamera (2 pages)
Summary of Contents for AirLive OD-2025HD
Page 1
OD-2025HD /OD-2025PHD 2-MegaPixel Outdoor 30fps 25 meter IR IPCAM / Passive PoE 2-MegaPixel Outdoor 30fps 25 meter IR IPCAM User’s Manual AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 2
Serial No. ____________________ To prevent fire or shock hazard, do not expose the unit to rain or moisture. For AC Adaptor to avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. AirLive OD-2025HD /OD-2025PHD User’s Manual...
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 4
This product contains some codes from GPL. In compliance with GPL agreement, AirLive will publish the GPL codes on our website. Please go to www.airlive.com...
Users are able to view live video streaming over the Internet, and it is only one of benefits for using AirLive IP Camera. It is also designed to offer high-performance surveillance and the AirLive OD-2025HD equipped with PoE port which allows power and data to be transmitted via a single Ethernet cable.
Page 8
PC. The live video can be uploaded to a website for the world to see. Note: AirLive OD-2025PHD uses 12V passive PoE. It is not compatible with 802.3af or 802.3at PoE switch. Please do not connect this IP camera to PoE switch, or the IP camera might be damaged.
1. Introduction 1.2 Package Contents User can find the following items in the package: Item Descriptions 1. OD-2025HD or OD-2025PHD is the main element of the product. 2. Wall mount 3. Wall mount stand 2. Screws x 3 3. Power Adapter...
6. PoE 1P: passive PoE injector (OD-2025HD only). Note: Using a power supply with a different voltage than the one included with the Network Camera will cause damage and void the warranty for this product.
Page 11
DI/ DO: Connect to sensor in and alarm out devices Cable for I/O connectors: Name Cable Color Function 12VDC Brown/White DC 12V (50mA maximum) Blue/White Purple/White Do not connect Gray Do not connect Green/White Digital signal input AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 12
Connect a loud speaker to the network camera. This function is for voice alerting and two-way audio. 7. BNC Connector The composite video format will be sent out through this connector. User might connect the IP Camera to a monitor or DVR via this connector. AirLive OD-2025HD /OD-2025PHD User’s Manual...
2. Connect the cable from the IP camera to the POE port, please note, for delivering the power properly, this should be a 4 twisted pair cable. 3. Plug the 12DC adapter to the DC phone jack. AirLive OD-2025HD /OD-2025PHD User’s Manual...
The power LED turned on, it means the system is booting up successfully. Furthermore, if you have a proper network connection, and access to the camera, the LAN LED (green) will flash. AirLive OD-2025HD /OD-2025PHD User’s Manual...
When you installed the Camera on a LAN environment, you have two easy ways to search your Cameras by IPWizard II or UPnP™ discovery. Here is the way to execute IPWizard II to discover Camera’s IP address and set up related parameter in a Camera. 2.1.1 Search AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 16
2. Preparation When launch the IPWizard II, a searching window will pop up. IPWizard II is starting to search Network Cameras on the LAN. The existed devices will be listed as below. AirLive OD-2025HD /OD-2025PHD User’s Manual...
View button. Then you could see the video from camera directly. Furthermore you could double click the left button of mouse to link to the network device by browser. AirLive OD-2025HD /OD-2025PHD User’s Manual...
2.1.3 LAN In case you want to change the IP related parameters of wired interface, please select the device you want to configure and click the LAN button. Relative settings will be carried out as below. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 19
2. Preparation You could modify the relative settings of the selected device. Click “<<” button will quit the LAN setting procedure and click “>>” button will move to next page as below. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 20
If you like to change username and/or password of the device, just click the check button. Then, the related fields will show up as below. After keying in new username and password, click “Submit” button to perform your setting accordingly. Click “<<” button will go back to previous page. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Note: Windows 2000 does not support UPnP feature. To discover your device, go to your Desktop and click My Network Places. Click the targeted Device. Then Internet Explorer will connect to this Network Camera automatically. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Refer to Setting Network UPnP page for detail NAT traversal setting. Note that this option is default enabled. (3) Access your Network Camera by DIPS Refer to Setting System System page for detail DIPS information. AirLive OD-2025HD /OD-2025PHD User’s Manual...
For the first time use (default value), input the User Name: admin Password: airlive That’s, type in “admin” on the “USERNAME” and “airlive” on the “PASSWORD”. Click “OK” button to start the main menu. 3. According your browser’s security setting, the IE Web Page may prompt the “Security Warning”...
If you log in the Camera as an ordinary User, “Setting” function will be not accessible. 2.6 Logging in as an Administrator If you log in the Camera as the Administrator, you can perform all the settings provided by the device. AirLive OD-2025HD /OD-2025PHD User’s Manual...
User can chose the proper and/or preferred profile which is listed here. Streaming Protocol User can select proper streaming protocol according to networking environment. Language The device could provide multiple languages to meet customer’s requirement. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 26
: Enlarge video to full screen display. Press “ESC” key to disable this function. PTZ Control Click to display the following control panel: Camera direction Camera speed Preset Go tour Tour Auto pan Camera direction: Control camera up/down/left/right and home position. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 27
On the ActiveX control icon, click the LeftMouseButton, then a menu pop-up. This menu provides features that are unique to the ActiveX control. These features include: • “Digital Zoom”, • “Snapshot”, • “Record”, • “Volume”, • “About” AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 28
3. Operating the Network Camera Digital Zoom Click Digital Zoom to active this function as above. User can drag or scale the box over the video to adjust zoom ratio and position. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 29
ASF format into your local PC. While you want to stop it, press Stop to stop recording. Select Browser, the pop-up window to select the save path and file name prefix, select OK to continue. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 30
Click Volume to activate this function. There are two control bars for speaker and microphone volume respectively. Scroll these control bars to adjust the audio attribute. Check the volume mute will mute the speaker output. About Click About to show this ActiveX information. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Object Setup Object detection Detection Storage Status and configuration of SD card Recording List Files list inside the SD Card Event Server Setup FTP/TCP/HTTP server for event Event Schedule Configure the schedule while event triggered AirLive OD-2025HD /OD-2025PHD User’s Manual...
With this setting, the IP address is assigned automatically. If this device can not get an IP address within limited tries, the device will assign a default IP address, 192.168.0.100, by itself as the default IP address. AirLive OD-2025HD /OD-2025PHD User’s Manual...
WAN, then the HTTP Port can be assigned as the virtual server port mapping to support multiple devices. Click “OK” to save and enable the setting. 4.1.2 HTTPS User can enable HTTPS for securing the video data if he enabled the HTTPS function. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Just how often it changes, depends on your ISP. A dynamic IP address complicates remote access since you may not know what your current WAN IP address is when you want to access your device over the Internet. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 35
As to xDSL environment, most of the users will use dynamic IP addresses. If users want to set up a web or a FTP server, then the Dynamic Domain Name Server is necessary. DDNS: To enable or disable the DDNS service here. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Power on again, then the device will dial on to the ISP connect to the WAN through the xDSL modem. The procedures are • Connect to a LAN by DHCP or Fixed IP • Access the device; enter Setting Network PPPoE as below AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 37
Type the password for the PPPoE service which is provided by the ISP. IP address, Subnet mask, and Gateway (read only): Shows the IP information got from PPPoE server site. Status: Shows the Status of PPPoE connection. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Enter the RTSP port number to use. The default value is 554. RTP Port: Specify the range of transmission port number of video stream. The default range is 50000 to 50999. User can specify a number between 1024 and 65535. AirLive OD-2025HD /OD-2025PHD User’s Manual...
HTTP traffic to an external HTTP port in the NAT router will be forwarded to the device. UPnP: To enable or disable the UPnP service here. Friendly Name: Shows the friendly name of this device here. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Bonjour is an open protocol which Apple has submitted to the IETF as part of the ongoing standards-creation process. Bonjour: To enable or disable the Bonjour service here. Friendly Name: Shows the friendly name of this device here. AirLive OD-2025HD /OD-2025PHD User’s Manual...
This IP camera support ONVIF V1.0, V1.01 and V1.02. If you need to use ONVIF as your protocol for connecting the IP camera with your backend management system, you can enable this protocol in this page. AirLive OD-2025HD /OD-2025PHD User’s Manual...
You can enter different user’s IP address which are allowing enter or denying by the device. IP Filter: To enable or disable the IP filter function here. IP Filter Policy: Choose the filter policy where is denying or allowing. AirLive OD-2025HD /OD-2025PHD User’s Manual...
If enable this function, then the “Send to“and “Subject” fields need to be filled. Send To: Type the receiver’s e-mail address. This address is used for reply mail. Subject: Type the subject/title of the E-mail. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 44
The message will be sent to FTP server. HTTP Notification: If enable this function, then the fields below need to be filled. URL: Type the server name or the IP address of the HTTP server. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 45
Type the user name for the HTTP Proxy. Proxy Login Password: Type the password for the HTTP Proxy. Custom parameter: User can set specific parameters to HTTP server. Message: The message will be sent to HTTP server. AirLive OD-2025HD /OD-2025PHD User’s Manual...
4.2 Camera: Adjust Camera Parameters Use this menu to set the functions of the camera parameters of the device. 4.2.1 Picture Rotation: Turn the “Mirror” and “Vertical Flip” On or OFF. The image will be overturned as below. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 47
Increase or decrease the hue of the video. Brightness: Large value will brighten camera. Sharpness: Large value will sharpen camera. Contrast: Large value will contrast camera heavily. Default Setting: Click on this button if you need restore the value to default state. AirLive OD-2025HD /OD-2025PHD User’s Manual...
By dragging mouse on the image, you can change the position and size of the selected privacy mask windows accordingly. Name: Name of the specified motion window Level: Select the color of the mask in gray level. AirLive OD-2025HD /OD-2025PHD User’s Manual...
This is the camera ID set in PTZ camera or speed dome camera. Note that please DO NOT change the default value if unnecessary. If so, user needs to check and set value properly for both sides. Baud rate: This is the communication speed between network module and P/T scanner. AirLive OD-2025HD /OD-2025PHD User’s Manual...
4. Administrating the Device 4.2.4 Preset Setting This page provides the edit tool to modify or delete the “Preset Setting” item by item. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Wait Time: Type a period of time during which the camera is to stay at each preset point, between 0 to 36000 seconds. To use the camera tour function, user must preset some camera positions first. AirLive OD-2025HD /OD-2025PHD User’s Manual...
IP Service, DIPS®. To use this service, just follow four steps below: (1) Enable DIPS function of the device (2) Check your Device ID from this page. This is a unique number for each device. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Server Date & Time: Displays the date and time of the device. PC Time: Displays the date and time of the connected PC. Adjust: - Synchronize with PC: Click this option to enable time synchronization with PC time. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 54
Select an interval between 1 and 23 hours at which you want to adjust the device’s time referring to NTP server Time zone: Set the time difference from Greenwich Mean Time in the area where the device is installed. Daylight Saving: Disable or enable the daylight saving adjustment. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Setting” button. The settings will be restored to the previous configuration. Firmware Upgrade: The device supports new firmware upgrade (the software that controls the operation in the device). Please contact your dealer for the latest version if necessary. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 56
Furthermore, the firmware upgrade procedure always is risk and do not try to upgrade new firmware if it’s not necessary. System Restart: The device is restarted without changing any of the network settings. It means the IP address of the device will not change after firmware upgrade. AirLive OD-2025HD /OD-2025PHD User’s Manual...
User can only choose either Mega or 2 Mega modes. Mega mode can serve H.264, MPEG4, and JPEG streams up to 1280x720 resolution simultaneously. On the other hand, 2 Mega mode, it can streams up to 1920x1080 resolution simultaneously. AirLive OD-2025HD /OD-2025PHD User’s Manual...
For VBR, user should choose the quality level to set the video quality rather than bit rate. The quality level is between 1 and 100. The higher value can reach the better quality but of course will consume higher bandwidth. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Defines the Intra/Inter-frame (I/P) ratio of this profile. For example, set the GOP to 30, then the video stream will have one Intra-frame every 30 frames. 4.4.3 ROI ROI means Region of Interest. Use this page to specify ROI window which ROI is QVGA resolution. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Mute the audio while pan and/or tilt motion Audio Mode: To select Simplex or Full duplex (2-way audio) mode Input Gain: To adjust gain of input audio Output Gain: To adjust gain of output audio AirLive OD-2025HD /OD-2025PHD User’s Manual...
Administrator can access every function in this device. However, Viewers only can view the video and access limited function. PTZ Control: Authorize this user to control PTZ function or not. Add, update, and remove of Users account: Manage the user’s account of viewer user. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Enable SSL function or not. SMTP Authentication: Select the authentication required when you send an e-mail. Disable: if no authentication is required when an e-mail is sent. Enable: if authentication is required when an e-mail is sent. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Type the subject/title of the e-mail. 4.8 Object Detection: Setup Object Detection Use this menu to specify motion detection window 1 to window 10 and set the conditions for detection while observing a captured image. AirLive OD-2025HD /OD-2025PHD User’s Manual...
You may setup FTP parameters for further operation of Event Schedule. That’s, if users want to send the alarm message to an FTP server, it will need to configure parameters here and also add at least one event schedule to enable event triggering as SMTP. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 65
Type the user name for the FTP server. FTP Login Password: Type the password for the FTP server. FTP Port: Set port number of FTP service. FTP Path: Set working directory path of FTP server. AirLive OD-2025HD /OD-2025PHD User’s Manual...
User can specify multiple TCP servers as wish. Therefore, user needs to specify a name for each TCP server setting. TCP Server: Type the server name or the IP address of the TCP server. TCP Port: Set port number of TCP server. AirLive OD-2025HD /OD-2025PHD User’s Manual...
HTTP Login name: Type the user name for the HTTP server. HTTP Login Password: Type the password for the HTTP server. Proxy Address: Type the server name or the IP address of the HTTP Proxy. AirLive OD-2025HD /OD-2025PHD User’s Manual...
User can specify multiple HTTP servers as wish. Therefore, user needs to specify a name for each HTTP server setting. SAMBA Server: Type the server name or the IP address of the SAMBA server. Test: Check the SAMBA server whether this account is available or not. AirLive OD-2025HD /OD-2025PHD User’s Manual...
This menu is used to specify the schedule of Event or Schedule Trigger and activate the some actions provided by this device. Where the Schedule Trigger will be activated by user-define interval without event happened. Name: Name of the Event or Schedule. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 70
4. Administrating the Device Enable: Enable or disable this Event or Schedule. Type: Event trigger or Schedule trigger. Enable Time: Define the feasible time slot. Trigger by: Select the triggered sources. Action: Define the actions once event triggered. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 71
Send file to FTP server by motion triggered always: Select event trigger Enable time: start from 00:00 to 24:00 every day Trigger by: Motion Area (Added in Object Detection page) Action : Send FTP (Add in Event Server -> FTP Server page) AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 72
Action : Send e-mail (Add in E-Mail page) To email address: You need to input the receiver email address. − Subject: You could specify the email subject. − Message: You could specify the email content. − AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 73
Enable time: Select Monday to Friday, and set start time from 18:00 and keep work in 6 hous. Trigger by : You do not need to choose it, because this will be triggered every minute Action : Voice Alert AirLive OD-2025HD /OD-2025PHD User’s Manual...
Define the picture numbers of JPEG to be sent out. Pre-Trigger Duration: Define the maximum duration of pre-alarm. Post-Trigger Duration: Define the maximum duration of post-alarm. Max File Size: Define the maximum buffer size of record file. AirLive OD-2025HD /OD-2025PHD User’s Manual...
RS485 data + Gray RS485 data - Green/White Digital signal input Orange/White Digital signal output User can refer to the schematic below to make a proper connection between I/O connector and external sensor and output device. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 76
THAT REQUIRE LARGE AMOUNTS OF CURRENT. IN SOME CASES, A CUSTOM INTERFACE CIRCUIT (CUSTOMER PROVIDED) MAY HAVE TO BE USED. SERIOUS DAMAGE TO NETWORK CAMERA MAY RESULT IF A DEVICE IS CONNECTED TO THE EXTERNAL I/O THAT EXCEEDS ITS ELECTRICAL CAPABILITY. AirLive OD-2025HD /OD-2025PHD User’s Manual...
If a firewall exists on the network, port 80 is open for installed and work if a ordinary data communication. The HTTP port and RTSP firewall exists on the port need to be opened on the firewall or NAT router. network. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 78
5. Appendix The username and Username = admin and Password = airlive. password for the first Note that it’s all case sensitivity. time or after factory default reset Forgot the username Follow the steps below. and password 1. Restore the factory default setting by press pressing and holding down more than 3 seconds on the device.
Page 79
• Packet Filtering of the router may prohibit access from an external network. Refer to your router's manual for details. • Access the Network Camera from the Internet with the AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 80
Setup the IE security settings or configure the individual displays the following settings to allow downloading and scripting of ActiveX message: “Your controls. current security settings prohibit downloading ActiveX controls”. The device work • Might be caused from the firewall protection. Check the AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 81
Center and Preset refresh. Positioning) • Other clients may be operating Pan/Tilt. • Pan/Tilt operation has reached the end of corner. Pan/Tilt does not work There may be a slight delay when you are using the AirLive OD-2025HD /OD-2025PHD User’s Manual...
IP address is accessible by sending a packet to the specific address and waiting for a reply. It’s also a very useful tool to confirm the device installed or if the IP address conflicts with any other devices over the network. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Actual results generated by the device may be varying. Image Average range of Average bit rate for Average bit rate for Resolution data sizes for MPEG4 mode H.264 mode JPEG mode 160 x 120 3 ~ 6k byte per 64kbps~256kbps 32kbps~192kbps AirLive OD-2025HD /OD-2025PHD User’s Manual...
128kbps, for optimal video performance, disabling audio streaming will get better video performance. Appendix E: Specifications Camera Model Name OD-2025HD/ OD-2025PHD 2 Mega-pixel image sensor Image Device 1920 x 1080 pixels Effective Pixels Lens 4.2mm...
Page 85
Video Buffer Pre- and post- alarm buffering General 256MB 16MB Power Supply 12V DC external power adapter OD-2025HD: IEEE 802.3af OD-2025PHD 12V Passive POE Power Consumption 8W (Max) RJ-45 10BaseT/100BaseTX DC power jack 1 alarm input and 1 output Connectors...
Internet. Be sure to uncheck the Reset IP address at next boot button at the top of the screen after modifying the IP address. Failure to do so will reset the IP address when you restart your computer. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 87
Virtual Server is accessed by clicking on the Advanced tab of the router screen. Follow these steps to configure your router’s Virtual Server settings • Click Enabled. • Enter a unique name for each entry. • Select Both under Protocol Type (TCP and UDP) AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 88
Enter valid ports in the Virtual Server section of your router. Please make sure to check the box on this line to enable settings. Then the device can be access from WAN by the router’s WAN IP Address. By now, you have finished your entire PC configuration for this device. AirLive OD-2025HD /OD-2025PHD User’s Manual...
DDNS and PPPoE of the Networked Device in order to let the outside administrator be able to access through internet. Application Steps—DDNS & Domain Name (1). Visit the following web site: http://www.dyndns.org/ (2). Click “Account” AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 90
(3). After the columns show up at the left side, click “Create Account”. (4). Fill the application agreement and necessary information. a. Username b. E-mail address and confirmation c. Password and confirmation d. Submit all the input information and finish creating an account AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 91
5. Appendix Click these two options AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 92
(5). Check your e-mail mailbox. There will be an e-mail with a title “Your DynDNS Account Information“. Click the hyperlink address to confirm the DDNS service that you just applied. Then DDNS you applied activated. Click to confirm AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 93
DDNS server. Input your account (7). If the correct username and password are input, you can see the following picture at the top-right of the login page. (8). Click the “Services”. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 94
(Pink No.1) Then we pick a domain that is easy to remember. (Pink No.2) The 3rd step is to click “Offline Hostname” from Service Type. (Pink No.3) Finally, click the “Create Host” to submit the domain name information and finish DDNS application. (Pink No.4) AirLive OD-2025HD /OD-2025PHD User’s Manual...
VOLTAGE FREQUENCY COMMENTS *Neutral and line wires are reversed Argentina 220V 50 Hz from that used in Australia and elsewhere. *Outlets typically controlled by Australia 230V* 50 Hz adjacent switch. Though nominal voltage has been AirLive OD-2025HD /OD-2025PHD User’s Manual...
2. Use the following URL to access: rtsp://host/mpeg4/media.3gp Where host is the host name or IP address of the camera. Compatible 3G mobile phone: Please contact your dealer to get the approved list of compatible 3G phone. AirLive OD-2025HD /OD-2025PHD User’s Manual...
Appendix J: Enable UPnP of Windows XP Use the following steps to enable UPnP settings only if your operating system of PC is running Windows XP. Go to Start > Settings. Click Control Panel Click Add or Remove Programs AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 99
5. Appendix Click Add/Remove Windows Components The following screen will appear: Select Networking Services Click Details AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 100
5. Appendix Select Universal Plug and Play Click Ok Click Next AirLive OD-2025HD /OD-2025PHD User’s Manual...
Page 101
5. Appendix Please wait while Setup configures the components. Click Finish AirLive OD-2025HD /OD-2025PHD User’s Manual...
Need help?
Do you have a question about the OD-2025HD and is the answer not in the manual?
Questions and answers