SATO M-5900RV Operator And Technical Reference Manual page 85
Direct thermal printer
Hide thumbs
Also See for M-5900RV:
- Operator and technical reference manual (258 pages) ,
- Operation manual (62 pages) ,
- Parts list (21 pages)
Table of Contents
Advertisement
Section 4. Programming Reference
Special Notes
1.
Use of this command will set the Vertical/Horizontal Offset setting of the
printer configuration until a new Base Reference Point command is issued or
the setting is changed from the operator panel. See Section 2: Installation
and Configuration.
2.
This command may be used more than once in a print job.
3.
An alternative to using this command is to make changes to your current
Horizontal and Vertical Print Position commands (see Page 4-61).
Example:
Let's say the current base reference point is H=1, V=1 and you wish to move
all the fields on your label downward vertically by 150 dots. You could either:
(1) add the Base Reference Point command or
(2) change all the vertical position commands by an additional 150 dots.
4. For a more detailed example of the Base Reference Point command, see
"Print Area" in this section (Page 4-5).
5.
The allowable field ranges for this command are:
Page 4-22
SATO M-5900RV Operator and Technical Reference Manual
M
5 -
9
0
H
o
i r
o z
n
l a t
a
a
a
a
V
r e
c i t
l a
b
b
b
b
0
R
V
0 -
8
3
2
o t
0
8
9
6
0
0
0
1
o t
1
4
2
4
PN 9001081
Rev. C
Advertisement
Table of Contents
