SATO M-5900RV Operator And Technical Reference Manual page 49

Advanced Mode
Advanced Mode Counters
The Advance Mode Counters is provided for reading and clearing internal counters. These
counters allow the user to keep track of the number of centimeters of label material that has
passed through the printer, how many labels have been dispensed or how many labels have been
cut. The Advanced Mode Counters display is entered by pressing the LINE key from the
Advanced Mode Setup; then press the .EED key to advance through the counters.
advanced mode
The Couters display allows you to select the counter to be viewed or cleared.
STEP
1.
2.
3.
head counter
PN 9001081
Rev. C
setup
PROCEDURE
Press the .EED key to advance through the Counters display.
counters
hd dsp cut life
HD: Head Counter
DSP: Dispense Counter
CUT: Cutter Counter
LI.E: Life Counter
Use the LINE key to step the underline cursor to the counter to be
reset or displayed; the Head counter (HD), Dispenser (DSP)
counter, CUT (Cutter) counter, or the LI.E counter.
Once the desired setting is underlined, press the .EED key to
display the values stored for that particular counter.
0.0 cut counter
SATO M-5900RV Operator and Technical Reference Manual
Section 2. Installation and Configuration
advanced mode
Line
counters
Key
0.0 life counter
0.0
Page 2-35