Custom Protocol Command Codes - SATO M-5900RV Operator And Technical Reference Manual

Custom Protocol Command Codes

Command Structure
<ESC>LD,a,b,c,d,e,f,g,h.,i
a
b
c
d
e
f
g
h
i
Example:
Placement:
Default:
Command Function
Allows the user to define Custom Protocol command codes
Printer Input
<ESC>A
<ESC>LD,{,},%,#,&,*,~,0,0
<ESC> Z
Printer Output
A Protocol Command code status label will be printed as a result of a successful
download of a custom set of Protocol Command codes.
PN 9001081
Rev. C
= Replacement character for STX in ASCII or hex format
= Replacement character for ETX in ASCII or hex format
= Replacement character for ESC in ASCII or hex format
= Replacement character for ENQ in ASCII or hex format
= Replacement character for CAN in ASCII or hex format
= Replacement character for NULL in ASCII or hex format
= Replacement character for OFFLINE in ASCII or hex format
= Auto-Online. Printer powers up in the Online mode.
0 = Yes
1 = No
= Zero Slash. Places a slash through the "0" character.
0 = Yes
1 = No
<ESC>LD,{,},%,#,&,*,~,0,0
Immediately following the <ESC>A Start command and in an
independent data stream.
Standard Protocol command codes
SATO M-5900RV Operator and Technical Reference Manual
Section 4. Programming Reference
Download
(Next Page)
Page 4-97