Download Print this page

AEG 400 KVA Manual

3-phase ups.
Hide thumbs
   

Advertisement

FLUXPOWER
400-500-600-800 KVA
Flexible and smart
The innovation and design of the Fluxpower HPS high
power UPS has resulted in the unit being the most
technologically advanced in its class.
It delivers an incredible combination of low input current
distortion, unity input power factor and high overall effi ciency.
These advances in design offer numerous benefi ts, including
lower running costs and substantially increased reliability.
Low THDi and power factor performance
The Fluxpower HPS model UPS uses a completely new IGBT input
rectifi er design, encompassing an advanced PFC (Power Factor
Control) which is capable of keeping input current THDi (Total
Harmonic Distortion) at a level of less than 3 % and input power
factor within 1 % of unity, even when only small loads are applied.
The key benefi ts are that the UPS is compatible with the
upstream source, the mains or any kind of generator and the
transfer of power between source and load is more effi cient.
This results in a saving in terms of scale of sources, cables
and protective devices.
HPS
3-phase UPS
High power solution for large,
mission-critical systems
High effi ciency reduces overall cost
of ownership
Fluxpower HPS has a new Wise ECO function which enables a
total operating effi ciency of between 95 % and 98 %. This mode,
referred to as "Intelligent ECO mode", signifi cantly reduces
the utility costs associated with operating a device of this type.
Moreover, this increase in effi ciency results in the production
of less waste heat, minimizing cooling / air-conditioning costs.
This represents a double saving to the energy conscious user.
The Wise ECO function uses continual monitoring techniques to
review the input characteristics of the supply. This means that if the
supply line drops or fl uctuates outside of acceptable conditions the
UPS uses the internal inverter to support the load. This is achieved
through a fast, fully static transition from VFD to VFI mode.

Advertisement

   Summary of Contents for AEG 400 KVA

  • Page 1

    FLUXPOWER 400-500-600-800 KVA 3-phase UPS High power solution for large, mission-critical systems Flexible and smart High effi ciency reduces overall cost of ownership The innovation and design of the Fluxpower HPS high power UPS has resulted in the unit being the most Fluxpower HPS has a new Wise ECO function which enables a technologically advanced in its class.

  • Page 2: Parallel Systems

    OPTIONAL (External Manual bypass) 1. Input mains (separate for by-pass and rectifier) FLUXPOWER HPS 2. Rectifier and battery charger 3. External battery 3-PHASE UPS 4. Inverter 3xL-N 5. Emergency line (by-pass) with optional backfeed contactor 6. Inverter (SSI) and by-pass (SSB) static switch 3xL-N It is possible to install an external manual bypass, +B -B...

  • Page 3

    FLUXPOWER HPS FEATURE RICH INTELLIGENCE Easy installation, operation and maintenance Parallel control is distributed Fluxpower HPS can easily be Optional between all units and sited within areas no wider than » Web / SNMP communication is achieved 1200 mm, and can be installed »...

  • Page 4

    IEC EN 62040-2 Test and Performance IEC EN 62040-3 Quality, environment, health and safety ISO9001:2008, ISO 14001:2004, BS OHSAS 18001:2007 AEG Power Solutions Approach your local AEG Power Solutions representative for further support. Contact details can be found on: www.aegps.com...

This manual also for:

500kva, 600 kva, 800 kva

Comments to this Manuals

Symbols: 0
Latest comments: