Verifying Tcp/Ip Properties - NETGEAR RT338 Reference Manual

Reference Guide for the Model RT338 ISDN Router

Verifying TCP/IP Properties

After your PC has been configured and rebooted, you can check the TCP/IP configuration using
the Windows utility winipcfg.exe (for NT systems, use ipconfig.exe).
To verify TCP/IP properties:
From the Windows taskbar Click on Start and choose Run.
1.
In the Open field, enter winipcfg.
2.
Click on OK.
3.
Note: In addition to displaying the current TCP/IP properties, the winipcfg utility lets
you release and renew DHCP-assigned information without rebooting the PC.
B-4 Configuring Windows TCP/IP