Selecting The Windows' Internet Access Method; Verifying Tcp/Ip Properties - NETGEAR DG632 Reference Manual

Reference Manual for the Model DG632 ADSL Modem Router
• By default, the IP Address tab is open on
this window.
• Verify the following:
Obtain an IP address automatically is
selected. If not selected, click in the radio
button to the left of it to select it. This
setting is required to enable the DHCP server
to automatically assign an IP address.
• Click OK to continue.
Restart the PC.
Repeat these steps for each PC with this
version of Windows on your network.

Selecting the Windows' Internet Access Method

On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.
1.
Double-click the Internet Options icon.
2.
Select "I want to set up my Internet connection manually" or "I want to connect through a
3.
Local Area Network" and click Next.
Select "I want to connect through a Local Area Network" and click Next.
4.
Uncheck all boxes in the LAN Internet Configuration screen and click Next.
5.
Proceed to the end of the Wizard.
6.

Verifying TCP/IP Properties

After your PC is configured and has rebooted, you can check the TCP/IP configuration using the
utility winipcfg.exe:
On the Windows taskbar, click the Start button, and then click Run.
1.
C-6 Preparing Your Network