NETGEAR RT338 Reference Manual page 102

Note: For North America, dial an ISDN data call using 1+area code or you will receive
a 56K connection instead of a 64K connection. Check with your local phone company.
Enter your login name in the My Login Name field.
4.
Enter the login name given to you by your ISP.
Enter your password in the My Password field.
5.
Enter the password associated with the login name from your ISP.
Enter single-user account information in the Single User Account field.
6.
If your ISP account is for a single user, set this field to "Yes." This setting enables NAT. If your
ISP assigns an IP address dynamically, leave IP Addr as "0.0.0.0." If your ISP assigns you a
single fixed permanent (static) IP address, enter it as "IP Address."
Enter the transfer rate in the Telco Options: Transfer Type field.
7.
When establishing a call in North America, your router specifies a data rate and the type of call
based on this field. The following three options are available for this field:
• 64K—Router places a 64 Kbps digital data call (default).
• 56K—Router places a 56 Kbps digital data call.
• DOVBS—Router places a 56 Kbps data over voice bearer service (DOVBS) call.
• Leased—Router is attached to a leased line.
If your router will be "nailed-up" (online, 24 hours a day) on a nonleased line, do not select
Leased. Select the appropriate option and set "Nailed-Up Connection= Yes" in Menu 11.1.
Use the space bar to make a selection in the Multilink field.
8.
This field determines the circumstances in which the router places an additional call (adding a
second ISDN B channel) to the ISP in order to increase the bandwidth of the connection. The
following three options are available for this field:
• Off—Router places only a single channel call to the ISP.
• Always—Router always calls the ISP using both channels for a 128K connection.
• BOD—Router adds bandwidth on demand (BOD), placing a second call when the data
rate increases beyond a specified level for a specified period. Change these parameters
using the Edit PPP submenu of Menu 11 - Remote Node Setup Menu.
Using the Manager Interface to Configure Internet Access
Reference Guide for the Model RT338 ISDN Router
6-3