Loading A Memory; Deleting A Saved Memory; Renaming A Memory - Epson EH-TW9200W User Manual

Adjusting the Image

Loading a Memory

a
Press the
The Load Memory screen is displayed.
b
Select the target memory name.
c
•
The color mode saved to the memory is displayed on the right.
•
Depending on the input signal, part of the loaded memory item may not be applied to the
projected image.
•
Memories saved for 2D images can only be loaded when projecting 2D images. Memories saved
for 3D images can only be loaded when projecting 3D images.

Deleting a Saved Memory

a
Press the
The Erase Memory screen is displayed.
b
Select the target memory name.
A confirmation message is displayed. If you select Yes, the content of the saved memory is erased.
c
If you want to erase all of the saved memories, go to Reset - Reset Memory on the
Configuration menu.

Renaming a Memory

You can rename each memory name using up to 12 characters. Giving the memory a name that is easy to
remember is useful when loading the memory.
a
Press the
The Rename Memory screen is displayed.
b
Select the target memory name.
The name list screen is displayed.
c
Select a displayed name or Customized.
To enter a name of your own, select Customized, and then go to step 4. If you select Customized, a
keyboard is displayed.
If you select from the name list, check that the memory name has been changed.
button, and then select Load Memory.
button, and then select Erase Memory.
p.75
s
button, and then select Rename Memory.
43