Introduction
Base
Name
a Front adjustable foot
b Ceiling mount fixing
points (four points)
c Cable cover fixing
screw
d Air exhaust vent
e Screw for anamor‐
phic lens
When setup on a surface such as a table, extend the foot to adjust the horizontal
tilt.
p.28
s
Attaches the optional ceiling mount here when suspending the projector from a
ceiling.
p.96
s
Attaches the optional cable cover.
Exhaust vent for air used to cool the WirelessHD receiver. When suspending from
a ceiling, make sure it is setup so that dust does not collect in this section.
Attaches the anamorphic lens.
15
Function