Rear - Epson EH-TW9200W User Manual

Introduction

Rear

Name
a Cable holder
b HDMI1 port
c HDMI2 port
d Component port
e Video port
f PC port
g RS-232C port
h Trigger out port
i Service port
j Remote receiver
k Power inlet
Thick HDMI cables with a large outer diameter and so on, may disconnect
easily due to the weight of the cable. To prevent the cable from disconnecting,
fix it in place using the HDMI cable clamp supplied (EH-TW9200W/EH-
TW9200/EH-TW8200W/EH-TW8200 only).
Connects HDMI compatible video equipment and computers.
Connects to the component (YCbCr or YPbPr) output port on video equip‐
ment. p.19
s
Connects to the composite video output port on video equipment.
Connects to the RGB output port on a computer.
When controlling the projector, connect the projector to a computer with an
RS-232C cable. This port is for control use and should not normally be used.
p.100
s
Connects with external devices such as motorized screens.
Service port. This is not normally used.
Receives signals from the remote control.
Connect the power cord.
14
Function
p.22
s
p.24
s
p.25
s
p.19
s
p.19
s
p.20
s
p.20
s