Remote Control - Epson EH-TW9200W User Manual

Introduction

Remote Control

Button
a
Turns the projector on.
b
Allows you to simultaneously project two im‐
age sources, one in the main screen and the
other in the sub screen. (Picture in Picture)
s
Press and hold the button to swap the main
or sub screen image sources.
c
Changes to the image from each input port.
s
TW9200W/EH-TW8200W.
d
This button displays the settings menu for
HDMI Link.
With the other buttons, you can then start or
stop playback, and so on for connected devi‐
ces that meets the HDMI CEC standards.
s
e
Changes between 2D and 3D.
f
Selects menu items and adjustment values.
s
g
The adjustment value returns to its default
value when pressed while the menu's adjust‐
ment screen is displayed.
h
Displays and closes the Configuration menu.
On the Configuration menu, you can make
adjustments and settings for Signal, Image,
Input Signal, and so on.
i
Sets Auto Iris.
j
Performs the function assigned to the user
button.
k
Saves, loads, or erases a memory.
11
Function
p.25
s
p.63
p.26
button is only available for EH-
p.61
p.65
s
s
p.38
s
p.70
s
p.45
s
p.65
p.65
p.42
s