Table of Contents
Advertisement
Useful Functions
WirelessHD Settings Menu
a
Press the
The Configuration menu is displayed.
b
Select Settings - WirelessHD.
The WirelessHD settings screen is
displayed.
Available functions on the WirelessHD settings menu
Function
Device Connections
WirelessHD
Reception
WiHD Mode
Reset
WirelessHD Transmission Range
The following shows the communication transmission range for the WirelessHD. Make sure you set up the
WirelessHD Transmitter so that it faces the projector.
Horizontal direction (when WiHD Mode is set to Nor‐
mal)
button.
Displays a list of available WirelessHD devices that can be connected. The device names
and MAC addresses (device numbers) are displayed in the list. The MAC address is
displayed on the label on the base.
Enables or disables the WirelessHD function.
Displays the reception.
Use Normal for most situations. Full mode uses the maximum video bandwidth at all
times. Dynamic mode extends wireless ranges while optimally adjusting video band‐
width. Set to Dynamic if the image is interrupted due to weak signals and other causes.
Resets WirelessHD settings to their default settings.
c
Make settings for each of the
displayed functions.
Explanation
Horizontal direction (when WiHD Mode is set to Dy‐
namic)
56
Hide quick links:
Advertisement
Table of Contents
