Wlan Module - HP Spectre 13 x2 PC Pro Ultrabook Maintenance And Service Manual

Reverse this procedure to install the solid-state drive.

WLAN module

Description
Broadcom BCM4352 802.11ac 2×2 Wi-Fi + BT 4.0 Combo Adapter
Intel Dual Band Wireless-AC 7260 802.11 ac 2×2 WiFi + BT 4.0 Combo Adapter
Intel Wireless-N 7260BN 802.11 b/g/n 2×2 WiFi + BT 4.0 Combo Adapter
Before removing the WLAN module, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
5.
Remove the tablet battery (see
Remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
labeled "1". The WLAN antenna cable labeled "2" connects to the WLAN module "Aux" terminal
labeled "2".
2. Remove the Phillips PM2.0×3.0 screw (2) that secures the WLAN module to the system board.
(The WLAN module tilts up.)
44 Chapter 5 Removal and replacement preliminary requirements
Back cover on page
Tablet battery on page
The WLAN antenna cable labeled "1" connects to the WLAN module "Main" terminal
37).
39).
Spare part number
724935-006
710661-006
717384-006