Figure 9-2 Code Page - Danish - Microcom 428TM Operator's Manual

Chapter 9 Code Page Switching
The printer uses the "^" caret and "|" pipe characters as delimiters so you must send 2
characters in a row to print them; ^^ would print a single ^.
Sending the HEX code of the character for the other non-standard characters will cause the
printer to print them. Example: Sending a 0xA8 would produce the Copyright character.
9.3.2 Danish Code Page
The Danish Code Page is selected when SW4 :( 5-8) = 0001.
Refer to Section 5.1.2.4 for more details on SW4 settings.
Figure 9-2 Code Page - Danish
428TM Operator's Manual - 880042-0141 9-3