Viper 5301 Installation Manual page 52

Responder le model 5301 remote start keyless entry
Hide thumbs Also See for 5301:
Table of Contents

Advertisement

2-8 Aux 1 Validity (1)
(4)
Validity: Output that will send a signal as long as the transmission is re-
ceived.
Latched: Output that will send a signal when the Aux 1 button is pressed
and will continue until the same button) is pressed again.
Latched, reset with ignition: Similar to the latched output this output type
turns ON the first time the Aux 1 button () is pressed and turns OFF the next
the same button is pressed. This output type additionally stops and resets
whenever the ignition is turned ON, and then OFF.
30-second timed: Output that will send a continuous signal for 30 sec-
onds.
Off: Output is disabled.
Note:
All auxiliary channel timed outputs can be programmed using the Bit-
writer® (1-90 seconds)
2-9 Aux 1 Linking, None (1)
(5). When programming to Validity or timed output this can be programmed to
activate when locking or unlocking (or remote start) with the transmitter.
Note: Aux linking gives you option to have the auxiliary wire activate when
locking, unlocking, locking and unlocking or with remote start.
2-10 Aux 2 Validity (1)
(4) Output, (5) Off: Auxl 2 can be programmed for these output configurations.
The unit is set to the default validity output. To change the configuration use the
two-honk setting to toggle through the different configurations. Refer to feature
2-8 for additional details
.
2-11 Aux 2 Linking None (1)
(5). Refer to feature 2-9 for additional details.
2-12 Aux 3 Validity (1)
(4) Output, (5) Off: Aux 3 can be programmed for these output configurations.
The unit is set to the default validity output. To change the configuration use the
two-honk setting to toggle through the different configurations. Refer to feature
2-8 for additional details.
52
Latched (2), Latch reset w/ignition (3), 30-sec. timed
Lock (2) Unlock (3) Lock/Unlock (4) Remote Start
Latched (2), Latch reset w/ignition (3), 30-sec. timed,
Arm (2) Disarm (3) Arm/Disarm (4) Remote Start
Latched (2), Latch reset w/ignition (3), 30 -sec. timed,
© 2008 Directed Electronics. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents