The Valet/Program switch, plugged into the blue port, is used for programming.
There is a basic sequence to remember whenever programming this unit: Door,
Key, Choose, Transmit and Release.
Once you have selected the function step, press the switch once more and hold
it. The LED flashes and the horn honks to confirm the selected functional step. Do
not release the Program switch.
38
1.
Insert the key. Turn the ignition to the ON
position. The heavy gauge pink wire must be con-
nected.
2.
Choose. Within 10 seconds, press and release the
Program switch corresponding to the number of
the desired function step listed in the following table.
© 2008 Directed Electronics. All rights reserved.