Note:
Some features have more than two possible settings. Pressing
will toggle through the two-honk and higher settings.
Once a feature is programmed:
•
Other features can be programmed within the same menu
•
Another menu can be selected
•
The learn routine can be exited if programming is complete
© 2008 Directed Electronics. All rights reserved.
3.
Select a Feature. Press and release the Valet/Pro-
gram switch the number of times corresponding
to the feature you wish to change. For example,
to access the third feature, press and release 3
times. Then press the button once more and HOLD
it. The LED flashes and horn honks the number of
times equal to the feature you have accessed.
4.
Program the Feature. While holding the Valet/
Program switch, you can toggle the feature
on and off using the remote control. Press-
ing the button that locks the system selects the
one- honk or default setting. Pressing the button that
unlocks the system will select the two-honk setting.
5.
Release. Valet/program switch.
or
43