Care And Maintenance - CDA DC740 Manual For Installation

• Touch until the end of cooking time indicator flashes.
• Then touch
When the correct time shows on the display, wait for approximately
five seconds. The cooking time and end of cooking time indicators
will remain lit to confirm the automatic programme is on.
• The oven will switch off until the automatic programme starts. When
the programme starts, the cooking time indicator will switch off
• When the cooking time is complete, there will be an alert beep
which will continue for two minutes and the end of cooking time
indicator will flash. To switch off the alert beep, touch any key.
Please note:
At the end of the cooking programme, remember to turn off the oven
manually.

Care and Maintenance

IMPORTANT
Before any maintenance is started involving electrical parts, the
appliance must be disconnected from the power supply.
If the oven has been in use, let the oven cavity and the heating
elements cool down before attempting any maintenance.
The oven exterior
As the oven has a stainless steel or enamel surface, you should use a
nonabrasive cleaner. Any abrasive cleaner (including Cif) will scratch
the surface and could erase the control panel markings. Stainless
steel can be effectively cleaned by simply using a dilute solution of
water and mild detergent and drying to a shine with a clean cloth.
12
or to select the required end of cooking time.