Care And Maintenance - CDA DC741 Installation, Use And Maintenance Manual

oven off at the control knobs, pressing a control panel key will re-
activate the previously set function.

Care and maintenance

IMPORTANT
Before any maintenance is started involving electrical parts, the
appliance must be disconnected from the power supply.
If the oven has been in use, let the oven cavity and the heating
elements cool down before attempting any maintenance.
The oven exterior
As the oven has a stainless steel or enamel surface, you should use a
nonabrasive cleaner. Any abrasive cleaner (including Cif) will scratch
the surface and could erase the control panel markings. Stainless
steel can be effectively cleaned by simply using a dilute solution of
water and mild detergent and drying to a shine with a clean cloth.
Proprietary stainless steel cleaners are available. We recommend the
a clean microfibre cloth for cleaning stainless steel surfaces.
Inside of the oven
The oven should always be cleaned after use when it has cooled
down.
The cavity should be cleaned using a mild detergent solution and
warm water.
Suitable proprietary chemical cleaners may be used after first
consulting with the manufacturers' recommendations and testing a
sample on a small area of the oven cavity. Abrasive cleaning agents or
13