Installation; Unit Installation - Cyclo Vac GS Series Owner's Manual

Unit Installation

using the mounting plate provided with
your vacuum cleaner, secure the unit to
the wall (figure 1), at a height allowing
easy access to change the bag (see
pages 6 and 7).
the connections to the piping system will
require some basic tools: a mitre box and
small saw or a pipe cutter (figure 2). See
pages 9 and 10 for general instructions
pertaining to the preparation of pVc
pipes. to simplify matters, installation
kits, including necessary fittings, pipes,
glue and low voltage wiring, as well
as a detailed instructions booklet, are
available from cyclo Vac service centers.
contrary to all other connections in the
piping system, do not glue the last fitting
to your unit. cyclo Vac central vacuums
are equipped with an adjustable air
intake valve (figure 3), which does not
require glue. an air-tight fit is achieved
with the screw-type adjustment on the
fitting itself.
8

Installation

figure 1
figure 2
figure 3