Muffler Installation - Cyclo Vac GS Series Owner's Manual

Muffler Installation

1. Insert the rubber coupling on the vacuum air exhausts
2. using a phillips screwdriver, tighten the clamp collar to ensure adequate sealing.
3. Insert the 90° elbow into the rubber coupling, and tighten then clamp collar as per
instructions in step 2.
4. Insert the muffler on the end of the 90° elbow.
Note: If installing the muffler in the inverted position (pointing to the ground), apply
PVC glue to the 90° elbow before inserting the muffler.
a. rubber coupling
B. 90° elbow
c. muffler
D. air exhaust
12
Installation