Cyclo Vac GS Series Owner's Manual page 21

the light emitting diodes on the Speed Variation hose will signal, by flashing, that
it is time to check the Integrated System monitor or the remote monitor installed
in your home. they do not indicate a problem with the vacuum system, and will
not hinder or stop the use of the vacuum power unit.
CYClo start
unit equipped with a
progressive start and
delayed shut-off to improve
motor longevity.
CYClo sPeed
allows selection of 4 power levels. fingertip control
conveniently located on the handle.
CYClo led
LeDs indicate the power level selected from 1 to 4.
CYClo alert
Bilinking LeDs refer you to the unit for status. It may be
time to change the bag or the unit may need preventive
maintenance (see page 23 for more details).
WarnInG
the use of an "SV" hose with a vacuum unit other than that of the Cyclo Vac
gX series will cause irreversible damage to your hose which would not be covered
by the warranty.
Speed Variation Module
operating Instructions
21