Mac Filtering - SmartRG SR300n User Manual

The individual fields on this screen are defined as follows:
Field Name
Filter Name
IP Version
Protocol
Source IP address [/prefix length]
Source Port (port or port:port)
Select All checkbox
First WAN interface (e.g. pppoe
based) checkbox
Last WAN interface (e.g. ipoe
based) checkbox
First LAN interface checkbox
Second LAN interface (as applica-
ble) checkbox
Bridged Interface checkbox

MAC Filtering

Your SmartRG gateway can block or forward packets based on the originating device. This MAC filtering feature is available only
in Bridging mode. For other modes, similar functionality is available via IP Filtering.
After selecting Advanced Setup -> Security -> MAC Filtering
desired.
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
Description
A free-form text field. Enter a descriptive name for this filter.
Version IPv4 applies by default. IPV6 can be alternately selected.
[TCP/UDP, TCP, UDP, or ICMP] Select the protocol to be associated with this incoming filter.
Enter source address for rule.
Enter source port number or range.
(Destination port numbers xxxxx:yyyyy).
Check as applicable to apply rule to all interfaces.
Check each as applicable to effect rule on specific WAN interface(s). WAN interface(s)
available for selection will be those configured in Routing mode and with firewall enabled.
Check each as applicable for desired rule.
Check as applicable for desired rule.
from the left sidebar, alter the Policy to FORWARD or BLOCKED as
Page 46
smartrg.com