Static Route - SmartRG SR300n User Manual

Static Route

Static Route is one form of manually configured, fixed route for IP data.
After selecting Advanced Setup -> Routing -> Static
Apply/Save button to commit the changes entered. Up to 32 entries may be added.
The individual fields on this screen are defined as follows:
Field Name
IP Version
Destination IP address/prefix length
Interface
Gateway IP Address
Metric (optional)
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
Route, click the Add
Description
[IPv4, IPv6] Select the IP version associated with the static route you wish to create.
Enter the destination network address / subnet mask for route
WAN Interface(s) available for selection. This list filtered by to IP Version set in the first
drop-down list.
Destination IP address desired (/prefix length if needed)
[>=0] Establishes traffic priority/weighting.
button and the following screen will appear. Click the
Page 58
smartrg.com