Quality Of Service; Qos Config - SmartRG SR300n User Manual

Note that there is only one Block List
unique Allow and Block List for each individual LAN device. Some additional flexibility however is available when your SmartRG
gateway is under management of Cisco Prime Home™. Refer to Cisco documentation regarding, "Content Filtering" for instruc-
tions.
The individual fields on this screen are defined as follows:
Field Name
URL Address
Port Number

Quality of Service

QOS enables prioritization of internet content to help ensure the best possible performance. This is particularly useful for stream-
ing video and audio content to minimized potential for drop-outs. QoS becomes significant when the sum of the traffic (audio,
video, data) exceeds the capacity of the line.

QoS Config

Use the QOS Config screen to enable QOS and set the
Note:
- In ATM mode, the maximum queues that can be configured is 16.
- In PTM mode, the maximum queues that can be configured is 8.
- For each Ethernet interface, the maximum configurable queues is 4.
- Queues for Wireless (e.g. WMM Voice Priority for wl0 interface) show only when wireless is enabled. If the WMM
Advertise function in the Wireless Basic Setup page is disabled, classification related to wireless will have no effect.
After selecting Advanced Setup -> Quality Of Service -> QoS
to enable QoS.
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
and one Allow List per gateway. The stand-alone modem capability does not maintain a
Description
URL address to be added to the enabled applicable Exclude or Include list.
Port number associated with URL being added (default 80 ).
DSCP Mark classification.
Config, click the checkbox toward the center of the screen if you wish
Page 50
smartrg.com