Manual Setup; Network Authentication: Wpa2-Psk - SmartRG SR300n User Manual

Field Name
Current Network Key
Network Key 1-4

Manual Setup

Network Authentication: WPA2-PSK

The individual fields on this screen are defined as follows:
Field Name
Select SSID
WPA/WAPI passphrase
Use base MAC address as WAP/WAPI
Passphrase
WPA Group Rekey Interval
WPA/WAPI Encryption
WEP Encryption
Encryption Strength
Current Network Key
Network Key 1-4
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
Description
[1-4] Select which of the four keys from the list is presently in effect.
Enter up to four encryption keys using the on-screen instructions to achieve the de-
sired security strength (128 or 64 bit).
Description
Select the SSID from the drop-down list for the wireless network to which this secu-
rity configuration will apply.
Enter the desired security password to be used by this security configuration.
In lieu of manually entering a password, allow the Base MAC address to be substi-
tuted for the password. When this box is checked, any content in the WPA/WAPI
passphrase field will be ignored.
[1-65535 seconds] The frequency with which the gateway automatically updates the
group key and sends it to connected LAN client devices.
[AES, TKIP+AES] Choose from Advanced Encryption Standard (AES) or AES com-
bined with Temporary Key Integrity Protocol (TKIP). This field has been pre-popu-
lated with the option most complimentary to the Network Authentication selected.
[Enabled, Disabled] Select Enabled to turn on Wired Equivalent Privacy mode.
[128 bit, 64 bit] Select the length of the encryption method. 128 bit being the more
robust option for security.
[1-4] Select which of the four keys from the list is presently in effect.
Enter up to four encryption keys using the on-screen instructions to achieve the de-
sired security strength (128 or 64 bit).
Page 90
smartrg.com