Ip Over Ethernet - SmartRG SR300n User Manual

IP Over Ethernet

The next WAN Service variant is IP over Ethernet.
After selecting Advanced Setup -> WAN
will follow. Advance to the next after completing the required fields using the Next button appearing near the bottom of each
screen.
First, select the Layer2 interface to use for the WAN service.
Click the Next button to advance to the next step.
Next, select the type of WAN service you wish to create.
For this example choose IP over Ethernet.
Click Next after completing the necessary fields.
The individual fields on this screen are defined as follows:
Field Name
WAN service type
Enter Service Description
Network Protocol Selection
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
Service from the left navigation bar, click the
Description
[PPP over Ethernet PPPOE, IP over Ethernet IPoE, Bridging]
Enter a name to describe this configuration.
[IPV4 Only]
[IPV4&IPV6] (Dual Stack) – IPV4 and IPV6 running concurrently.
[IPV6 Only]
Note: When selecting IPV4&IPV6 or IPV6 the subsequent options presented will change ac-
cordingly.
Add button. A progression of several screens
Page 35
smartrg.com