Warranty Registration
3. Attach the chassis to the rack with two screws (not provided) on each
side. Refer to Figure 20.
Note
The brackets are designed to be installed in a 3.5RU opening on a
standard rack.
7
8
9
Figure 20 Installing the Chassis in a Rack
4. Do not apply power at this time. Connect the frame ground to the
chassis. Refer to
Connecting the Frame Ground
When you have finished installing the product, you should register your
product by completing the enclosed warranty card and sending it in.
AT-8400 Series Switch Reference Guide
1 0
1 1
1 2
on page 92.
53