Table of Contents
Advertisement
6.
Connect the data cables and observe normal operation as indicated by
the port LEDs. Refer to Table 1 on page 3 for LED information. For
Port 4, set the MDI Button to the correct setting. Refer to Table 2 on
page 4 for the MDI setting.
Warranty Registration
When you finish the installation, register your product by completing the
enclosed warranty card and sending it in, or by visiting our web site at
www.alliedtelesyn.com/forms/warranty.htm and completing the on-line
registration.
AT-GS903SX Installation Guide
11
Advertisement
Table of Contents
