Mobile Software Programming; Introduction - Siemens CF62 Leopard Service Manual

Hide thumbs Also See for CF62 Leopard:

Table of Contents

SIEMENS

CF62 Level 2 Service Manual

Mobile Software Programming

The common mobile software available is divided into language groups. However, this

software does not contain the specific settings, such as ringing tones, greeting text, short

dial list etc., required by the operator(s) or service provider(s). Therefore, it is not

uncommon to have some menu item(s) differ in different variants or are not visible at all.

These settings are stored in different memory area of the mobile and will be activated

depending on the customer specific model or variant of the phone by a separate test step

during the production process.

Due to this separation of common mobile software and customer specific initialization, it

is possible to fulfill the demands of the market requiring customization and flexibility. As

a consequence the software programming process in the LSO is divided into two different

steps as followed:

- Software update to actual version and appropriate language group

- Programming of customer specific initialization. Include mapping and FFS.

FIGURE 7.1 CF62 SERIES SOFTWARE PROGRAMMING SETUP

SSMC MD CCQ

27 of 42

Internal Service Use Only

Siemenes Shanghai Technical Support Center

Table of Contents