Siemens CF62 Leopard Service Manual page 21

SIEMENS
CF62 Level 2 Service Manual
Step 15:Detach the Lift part assembly:
A:
Remove the Display lens main B from the Lift
part assembly by using the driver.
C:
Remove the two screws from the Lift part
assembly by using the screwdriver.
E:
Remove the Hinge and the Vibra from the Lift
cover assembly.
Copyright © Siemens Mobile
All rights reserved
Siemenes Shanghai Technical Support Center
B:
Lift part assembly and Display lens main B can be
seen after disassembled.
D:
To separate the Lift cover assembly from the Lift
part assembly.
F:
Remove the LCD module from the Lift frame
assembly.
21 of 42
SSMC MD CCQ
Internal Service Use Only