Mobile Software Programming - Siemens S45 Service Manual

The mobile equipment is uniquely identified by the International Mobile Equipment Identity, IMEI,
which consists of 15 digits. Type approval granted to a type of mobile is allocated 6 digits. The
final assembly code is used to identify the final assembly plant and is assigned with 2 digits. 6
digits have been allocated for the equipment serial number for manufacturer and the last digit is
spare.
S45/ME45 IMEI label is accessible by removing the battery cover and the battery.
On this IMEI label, Siemens has also includes the date code for production or service, which
conforms to the industrial standard DIN EN 60062. The date code comprises of 2 characters:
first character denotes the Year and the second character denotes the Month.
Example: KD
Year
1998
1999
2000
TABLE 2.1 DIN EN 60062 DATE CODE

Mobile Software Programming

The software of the mobile, S45/ME45 is loaded from a PC directly. Hardware interconnection
between the mobile and the PC is shown in Figure 2.4. The peripherals for the interconnection is
defined in the ANNEX page
FIGURE 2.4 S45/ME45 SOFTWARE PROGRAMMING SETUP
Flow chart 2.1 illustrates the software programming process.
Plug in the Boot
Adaptor to the PC
and Mobile
Connect the AC
Faulty Boot Check AC Faulty AC
adaptor to the
Adaptor Adaptor Adaptor
Boot Adaptor
No Yes
Date Code Month
K December
L January
M February
Power up the
PC in DOS
environment
Check
Execute the
H/W setup =
Correct settings.
"Mobile S/W"
No Yes Yes
S/W
Date Code
D
1
2
Software
upgrading in
progress
Feedback Error Take note of
error and repeat to Tech. Supp.
Test Mobile
END
process again Dep.