Siemens CF62 Leopard Service Manual page 19

SIEMENS
CF62 Level 2 Service Manual
Step
7:
The lower edge of the Base lower has now been
detached from the phone as shown.
Step
9:
Remove the Microphone from the Base upper
assembly.
Step
11:
Remove the PCB Assembly by holding it of both in the middle and lifting it straight up.
Copyright © Siemens Mobile
All rights reserved
Siemenes Shanghai Technical Support Center
Step
8:
Remove the Base lower by carefully lifting it up.
Note: Be careful not to break or bend the top
plastic pin.
Step
10:
Detach the FPCB-cable connector from the PCB
(Main board) Assembly.
19 of 42
SSMC MD CCQ
Internal Service Use Only