Mobile Software Programming - Siemens M65 Service Manual

Hide thumbs Also See for M65:

Table of Contents

S I E M E N S P T E L T D

M65 Level 2 Service Manual

Mobile Software Programming

The common mobile software available is divided into language groups. However, this

software does not contain the specific settings, such as ringing tones, greeting text, and

short dial list etc., required by the operator or service provider. Therefore, it is common to

have some menu item(s) differ in different variants or are not visible at all. These settings

are stored in different memory area of the mobile and will be activated depending on the

customer specific model or variant of the phone by a separate test step during the

production process.

Due to this separation of common mobile software and customer specific initialization, it

is possible to fulfil the demands of the market requiring customization and flexibility. As a

consequence the software programming process in the LSO is divided into two different

steps as followed:

- Software update to actual version and appropriate language group

- Programming of CUSTOMER SPECIFIC INITIALIZATION

Figure 1. M65 Software Programming Setup

Siemens Technical Support Centre

May 2004

ICM MP CCQ SLI RHQ

Page 20 of 37

Company Confidential

Table of Contents