Mobile Software Programming - Siemens SL75 Service Manual

Hide thumbs Also See for SL75:
Table of Contents

Advertisement

SL75 Level 2 Service Manual
10

Mobile Software Programming

The common mobile software available is divided into language groups. However, this
software does not contain the specific settings, such as ringing tones, greeting text, and
short dial list etc., required by the operator or service provider. Therefore, it is common to
have some menu item(s) differ in different variants or are not visible at all. These settings
are stored in different memory area of the mobile and will be activated depending on the
customer specific model or variant of the phone by a separate test step during the
production process.
Due to this separation of common mobile software and customer specific initialization, it
is possible to fulfil the demands of the market requiring customization and flexibility. As a
consequence the software programming process in the LSO is divided into two different
steps as followed:
- Software update to actual version and appropriate language group
- Programming of CUSTOMER SPECIFIC INITIALIZATION
Figure 1. S65 Software Programming Setup
Copyright © Siemens Pte Ltd.
Siemens Technical Support Centre
All Rights Reserved
COM D CCQ APAC SLI
Page 27 of 44
Internal Use Only

Advertisement

Table of Contents
loading

Table of Contents