SIEMENS
CF62 Level 2 Service Manual
6
Assembly of CF62 Leopard
Step 1:
For the reassembly of the CF62 Lift part assembly, reverse the disassembly procedures Step 14
from J to A. Reassembled Lift part assembly as shown. Set torque to 16 Ncm.
Step 2:
To fix the Lift part assembly to the Base upper assembly, push the hinge catch inwards with a pair of
special driver.
Step 3:Reassemble the PCB Assembly
A:
Take a new Metal dome.
Copyright © Siemens Mobile
All rights reserved
Siemenes Shanghai Technical Support Center
B:
Take a PCB (Main board) and detach the protection
foil from the new Metal dome with the tweezers.
Take care its two hole (marked with arrows)
position.
23 of 42
SSMC MD CCQ
Internal Service Use Only