Identifying Parts And Controls - IBM P97 Operating Instructions Manual

Identifying parts and controls

See the pages in parentheses for further details.
Front
1 6m (contrast/down) and
buttons (pages 5 – 12)
These buttons are used to display the BRIGHT/CONTRAST
menu and to highlight the desired menu item.
2 button (pages 5 – 12)
This button is used to display the menu and to select the menu
item and to activated the adjustment.
3 </, buttons
(pages 5 – 12)
These buttons are used to make the adjustment.
4 1 (power) button and indicator (pages 4, 13, 15, 17)
This button turns the monitor on and off. The power indicator
lights up in green when the monitor is turned on, and lights up
in orange when the monitor is in power saving mode.
M (brightness/up)
Rear
5
5 AC input connector (page 4)
This connector provides ac power to the monitor.
6 Video input connector (HD15) (page 4)
This connector inputs RGB video signals (0.700 Vp-p,
positive) and sync signals.
1 2 3 4 5
6
11
Pin No. Signal
1 Red
2 Green
(Sync on
Green)
3 Blue
4 ID (Ground)
5 DDC Ground*
6 Red Ground
7 Green Ground
* Display Data Channel (DDC) Standard of VESA
3
6
7 8 9 10
12 13 14 15
Pin No. Signal
8 Blue Ground
9 DDC + 5V*
10 Ground
11 ID (Ground)
12 Bi-Directional
Data (SDA)*
13 H. Sync
14 V. Sync
15 Data Clock
(SCL)*
US