Identifying Parts And Controls - IBM E54 Operating Instructions Manual

US-2
IDENTIFYING PARTS AND
CONTROLS
See the pages in parentheses for further detail.
Front
a b c
a. Displays menu & exits menu
b. Scrolls through menu to choose an icon for
adjustment /
Adjusts level of selected icon
c. Confirms menu selection
d. Power ON/OFF switch
e. Power LED
Rear
f.
g. Video input cable
d e
*NOTE:
g
f
AC input connector
This connector provides AC power to the
monitor.
Inputs RGB video signals (0.700 Vp-p,
positive) and sync signals.
1
Pin Function Pin
1 Red signal 9
2 Green signal 10
3 Blue signal 11
4 Ground 12
NC
5 13
(*NOTE)
6 Red return 14
7 Green return 15
8 Blue return
This pin is used for self test detection; at
side, this pin has to be connected
MONITOR
to ground.
5
15
Function
+5V (from computer)
Digital ground
Ground
SDA (DDC1/DDC2B)
Horizontal
Synchronization
Vertical synchronization
& VCLK (DDC1)
SCL (DDC 2B)