IBM E74 Operating Instructions Manual page 13

COLOR selection
The white of the image can be adjusted.
1) Use the button to select: (1)9300
(2)6500 O K or (3)User color.
2) If the (3):the user's color is selected, "2"
appears in the lower right of the On-Screen
Menu.
2
Press the button to display the USER
COLOR adjustment screen.
USER COLOR
The white of the video image can be adjusted
to the user's preferred color.
1) Use the button to select R (red), G
2
(green) or B (blue).
2) Use the button to adjust the color as
desired.
IMPORTANT-Memory recall of the user's
color is not possible, so take note of the initial
setting before adjusting.
When the monitor is turned OFF, user color
keeps the last adjustment.
LANGUAGE selection
The language of the On-Screen Menu can be
selected among English, French, German,
Italian and Spanish. Select with the
buttons.
DISP. FREQ (Input frequency display)
This displays the input synchronization signal
frequency.
It identifies the horizontal and vertical
frequency sent to the monitor from the video
card currently in use.
MANUAL DEGAUSSING
After moving the selector to the degauss icon,
O K,
press the button. The degaussing action
2
takes place a few seconds later.
Note: A sharp snap noise may be heard when
degaussing occurs. This is normal.
MEMORY RECALL
It is possible to restore adjustments to the
original factory settings. If the monitor is
operating in a user defined mode, this control
has no effect.
HORIZONTAL MOIRE
Reduce the dark wavy line Moire pattern on
the screen.
Press the or
horizontal moire image on the screen.
VERTICAL MOIRE
Reduce the dark wavy line Moire pattern on
the screen.
Press the or
vertical moire image on the screen.
US-7
button to minimize the
button to minimize the