Identifying parts and controls
See the pages in parentheses for further details.
Front
1
(input) switch (page 6)
This switch selects 1 (video input connector 1: 1
) or 2
(video input connector 2: 2
).
2 6m(contrast/down) and
M (brightness/up)
buttons (pages 6 – 14)
These buttons are used to display the CONTRAST/BRIGHT
menu and to highlight the desired menu item.
3
button (pages 6 – 14)
This button is used to display the menu and to select the menu
item and to activated the adjustment.
4 </, buttons
(pages 6 – 14)
These buttons are used to make the adjustment.
5 ! (power) button and indicator (pages 5, 15, 17, 19)
This button turns the monitor on and off. The power indicator
lights up in green when the monitor is turned on, and lights up
in orange when the monitor is in power saving mode.
Rear
AC IN
6 AC input connector (page 5)
This connector provides AC power to the monitor.
7 Video input connector 1 (HD15) (1
) (page 4)
US
Inputs RGB video signals (0.700 Vp-p, positive) and sync
signals.
5 4 3 2 1
10
9
8
7
6
15
14
13
12
11
Pin No.
Signal
Pin No. Signal
1
Red
8
Blue Ground
2
Green
9
DDC + 5V*
(Sync on
10
Ground
Green)
11
ID (Ground)
3
Blue
12
Bi-Directional
4
ID (Ground)
Data (SDA)*
5
DDC Ground*
13
H. Sync
6
Red Ground
14
V. Sync
7
Green Ground
15
Data Clock
(SCL)*
* Display Data Channel (DDC) Standard of VESA
(continued)
Page 3