Identifying Parts And Controls - IBM P77 Operating Instructions Manual

Identifying parts and controls

See the pages in parentheses for further details.
Front
1 1 1 1 m and M buttons (pages 6, 7)
These buttons display the BRIGHTNESS/CONTRAST
menu. These buttons are also used to navigate the menu and
to make adjustments to the selected MAIN items.
2 2 2 2 button (page 6)
The button is used to display the main MENU on your
screen.
3 3 < and , buttons (page 7)
3 3
These buttons display the BRIGHTNESS/CONTRAST
menu. These buttons are also used to make adjustments to the
selected menu item.
4 4 1 (power) button and indicator (pages 4, 10, 13) 4 4
This button turns the monitor on and off. The power indicator
lights up in green when the monitor is turned on and lights up
in amber when the monitor is in power saving mode.
Rear
5
5 AC input connector (pages 2, 4, 13)
This connector provides AC power to the monitor.
6 Video input connector (HD15) (page 4) 6 6 6
This connector inputs RGB video signals (0.700 Vp-p,
positive) and sync signals.
1 2 3 4 5
6 7
11 12 13 14 15
Pin No. Signal
1 Red
2 Green (Sync on Green)
3 Blue
4 ID (Ground)
5 DDC Ground*
6 Red Ground
7 Green Ground
8 Blue Ground
9 DDC Host 5 V*
10 Ground
11 ID (Ground)
12 Bi-Directional Data (SDA)*
13 H. Sync
14 V. Sync
15 Data Clock (SCL)*
* DDC (Display Data Channel) is a standard of VESA.
3
10
8 9