Product Safety Precautions - VarTech Systems DiamondVue VT084C User Manual

Product Safety Precautions

1.2
Ensure that sufficient space is available around the display to provide the
⇒
circulation necessary for cooling.
Ensure that the ambient air temperature will not exceed the specified
⇒
maximum temperature.
Do not attempt to service this display yourself. The rear chassis has a seal so
⇒
that non qualified personal will not expose themselves to dangerous voltages
or other risks.
To protect from electrical shock, unplug the display power supply from the wall
⇒
before moving.
Do not expose the display to direct sunlight or heat.
⇒
Do not use this display near water
⇒
Do not place any heavy objects on the power cords. Damage may cause
⇒
electrical shock.
Unplug the power supply from the wall or unit if one of the following conditions
⇒
exists.
⇒
⇒
⇒
⇒
⇒
8.4' DiamondVue User Guide
Power cord or plug is damaged or frayed.
Liquid is spilled into the display or the display is exposed to rain or
water.
The display does not operate normally when the operating
instructions are followed.
The display has been dropped or the enclosure has been
damaged.
The display exhibits a distinct change in performance, indicating a
need for service.
2
150.028