S Y S T E M S I N C. Industrial CRT and Flat Panel Displays VT150 High Bright Series 15.0” High Bright Series LCD Monitors VT150CHB VT150DHB User’s Guide Read these instructions completely before attempting to operate your new Color Display...
Section INTRODUCTION INTRODUCTION VT150 High Bright Series The VT150 high bright (HB) series of LCD displays supplies a superior display consisting of a native resolution of XGA (1024x768) and 700 nits of brightness. The VT150 high bright series is capable of displaying video resolutions of VGA (640x480), SVGA (800x600), and XGA (1024x768).
Product Safety Precautions Ensure that sufficient space is available around the display to provide the circulation ⇒ necessary for cooling. Ensure that the ambient air temperature will not exceed the specified maximum ⇒ temperature. Do not attempt to service this display yourself. The rear chassis has a seal so that non ⇒...
Unpacking and setting up your display Your LCD monitor package will consist of the components listed below. Open shipping container and lay all components on a flat clean surface. What is included with your display VT150CHB or VT150DHB LCD Monitor ⇒ VGA Cable ⇒...
Connecting the Display 1. Turn off the PC and the LCD Monitor before making any connections. 2. Use the supplied VGA cable to connect the VGA connector of the LCD Monitor to the VGA port of the PC system. 3. Use the supplied audio cable to connect the “Audio in” jack on your LCD Monitor and the PC sound card’s “Audio out”...
Section Getting Started Operating the Monitor Users can adjust the picture to the desired brightness and sharpness by following these instructions. The adjustment buttons utilize a security feature that required the use of a paper clip or pin to activate each selection. This is accomplished through pinholes in each button except the power on/off.
Page 8
How to Use the OSD (On Screen Display) The OSD function allows the user to easily adjust the display to the desired requirements. The OSD menu includes a main menu and sub-menus. Use the buttons on the right side control panel to adjust the OSD (see Operating the Monitor). Color Temp.
Additional On Screen Display (OSD) Information The OSD disappears (times-out) several seconds after you stop pressing the buttons while performing an adjustment. This function can be adjusted up to 60 seconds allow- ing the user more time. This adjustment is made in the “Settings” submenu. Any changes made are automatically saved in the Touch Monitor memory when the OSD disappears.
On Screen Display (OSD) Control Adjustment Table The following table indicates all the On Screen Display control, adjustment, and setting menus. Main Menu Sub Menu Reference IMAGE BRIGHTNESS Adjust the brightness of the screen CONTRAST Adjust the contrast of the image Adjust the clock pulse of the image CLOCK PHASE...
Section Display Timing Applicable Video Timing The following table lists the better display quality modes that these LCD monitors provide. If the other video modes are input, the monitor will stop working or display unsatisfactory picture quality. VESA MODES Horizontal Vertical Nominal Nominal...
Installation All Vartech Systems displays configured with a touch screen are supplied with a CDROM which includes user manuals, application software, and drivers for various operating systems. Insert the supplied CDROM into a CDROM drive and follow the installation instructions that will appear on the screen.
Section Troubleshooting If the LCD Touch Monitor fails to function correctly, please follow these steps for a possible solution. 1. Perform the adjustments according to Operating the Monitor section. 2. Refer to the following troubleshooting chart if you cannot resolve the problem from other sections of this Users Guide.
Section Cleaning and Maintenance CLEANING Warning If you dropped any material or liquid such as water onto the monitor when cleaning, unplug the power cable immediately and contact your dealer or the nearest service center. Always make sure your hands are dry when unplugging the power cable. Caution ˙For safety reasons, turn-off the power switch and unplug the monitor before cleaning.
Section Notes SPECIAL NOTES ON LCD TOUCH MONITORS The following are normal with LCD Touch Monitors and do not indicate a problem. • When the LCD Touch Monitor is first powered on, the picture may not fit in the display area. This is because of the type of computer graphics system that is used.
TTL Separate H&V, Combined, Input Connectors HD15(F), DVI, DB9(F) with cable for CVBS, S-video Power Source 90-264VAC Universal Optional: 12VDC @ 2.5A (VT150CHB only) Power Consumption 33 Watts @ 115VAC 4 Watts Sleep Mode Temperature Operating: 0° to 50°C Storage: -20° to 60°C...
Page 17
VARTECH SYSTEMS INC. HEADQUARTERS 11529 Sun Belt Ct. Baton Rouge, Louisiana 70809 Toll-Free: 800.223.8050 International Phone: 001.225.298.0300 Fax: 225.297.2440 E-mail: sales@vartechsystems.com www.vartechsystems.com 150-085-001 10.03.05 VT150 High Bright User Guide 150-085...