Mode Setting; Monitor Mode; Input 4 Mode; Master User Setting - Datavideo SE-2000 Instruction Manual

MODE SETTING

- Press the MENU button and highlight the MODE SETTING.
Press the arrow buttons to select an item and press the ENT to confirm the setting.
-
- This Mode setting is used to adjust the HD input mode.
HD Mode values can be 1080/50i - 1080/60i - 1080/59.94i - 720/50p - 720/60p or 720/59.94p
-
MASTER USER SETTING: When selected, the values for the above are copied from the BASIC profile.
-
Please ensure your HD input source(s) match the HD mode of the SE-2000.
-
The selected HD mode is confirmed between the PREVIEW and PROGRAM windows on the Multi
Preview Display.

MONITOR MODE

Press the MENU button and highlight the MONITOR MODE option.
-
Press the arrow buttons to select an item and press the ENT to confirm the setting.
-
This mode adjusts the Multi Preview DVI-D output between 1080i 60Hz and 720p 60Hz.
-
MASTER USER SETTING: When selected, the values for the above are copied from the BASIC profile.
-

INPUT 4 MODE

Press the MENU button and highlight the INPUT 4 MODE option.
-
Press the arrow buttons to select an input option and press the ENT to confirm the setting.
-
This mode is used to switch INPUT 4 from HD-SDI input to DVI-D input and vice versa.
-
MASTER USER SETTING: When selected, the values for the above are copied from the BASIC profile.
-
The changed setting will also be confirmed between PREVIEW and PROGRAM windows on the Multi
Preview Display.

MASTER USER SETTING

- Press the MENU button and highlight the MASTER USER SETTING option.
- Press the arrow buttons to select an item and press the ENT to confirm the setting.
- This mode is used to return the SE-2000 BASIC profile (USER 0) to its factory default settings.
- If the BASIC profile is changed then any USER profiles (1 ~ 5) linked to BASIC will also be changed.

SOFT EDGE

Press the MENU button and highlight the SOFT EDGE option.
-
- Press the arrow buttons to select an item and press the ENT to confirm the setting.
This mode is used to set the size of the soft border (SFT Key) when using a WIPE transition or the PIP
effect.

AUTO TAKE SPEED

Press the MENU button and highlight the AUTO TAKE SPEED option.
-
Press the arrow buttons to select an item and press the ENT to confirm the setting.
-
This adjusts the different speeds of the selected transition effect when the TAKE button is used.
-
16