Parts Supplied; Materials You Will Need; Tools You Will Need - GE Built-In Dishwasher Installation Instructions Manual

PARTS SUPPLIED:

Two #8 Phillips flat head wood screws, 5/8"long
to secure dishwasher to underside of countertop
(in literature package).

MATERIALS YOU WILL NEED:

Ferrule, compression nut and 90° Elbow (3/8"NPT
external thread on one end, opposite end sized to
fit water supply)
Thread seal tape
UL Listed wire nuts (3)
Materials For New Installations Only:
Air gap for drain hose, if required
Waste tee for house plumbing, if applicable
Electrical cable or power cord, if applicable
Screw type hose clamps
Strain relief for electrical connection.
Hand shut-off valve
Water line 3/8"min. copper
Coupler for extending drain line, if applicable

TOOLS YOU WILL NEED:

Phillips head screwdriver
5/16"and 1/4"nutdriver
6" Adjustable wrench
Level
Carpenters square
Measuring tape
Safety glasses
Flashlight
Bucket to catch water when flushing the line
Gloves
For New Installations Only:
Tubing cutter
Drill and appropriate bits
Hole saw set
Installation Preparation
Compression Nut
Phillips head
5/16"and
screwdriver
1/4"nutdriver
Safety glasses
Measuring tape
Tubing cutter
2
2 Wood Screws
90° Elbow,
Hand
Ferrule and
Shut-Off
Valve
Waste Tee
Electrical Cable
(or Power Cord, if applicable)
Screw Type
Air Gap
Hose Clamps
6" Adjustable
wrench
Flashlight
Bucket
Drill and Bits
Wire Nuts (3)
Thread
Seal Tape
Hot Water line
Strain Relief
Coupler
Level
Carpenters
square
Gloves
Hole saw set