Parts Supplied; Materials You Will Need; Tools You Will Need - GE GLDT696D00SS Installation Instructions Manual

Installation Preparation
PARTS SUPPLIED:
O Two #8 Phillips flat head wood screws, 5/8"long
to secure dishwasher to underside of countertop
(in literature package).
external thread on one end, opposite end sized to
fit water supply)
O
Thread seal tape
90° Elbow,
Hand Thread
Seal Tape
O
UL Listed wire nuts (3)
Ferruleand Shut-Off
p
Compression Nut valve
MATERIALS YOU WILL NEED:
Ol Ferrule, compression nut and 90° Elbow (3/8"NPT =)
dee S S0=
Wire Nuts {3}
Air gap for drain hose, if required
Waste tee for house plumbing, ifapplicable — waste Tee S
Electrical cable or power cord, if applicable Electrical Cable
Screw type hose clamps (or Power Cord, if applicable)
Strain relief for electrical connection.
Hand shut-off valve
Water line 3/8"min. copper
Coupler for extending drain line, if applicable
Materials For New Installations Only: co
Strain Relief
Screw Type | |
Hose Clamps
Coupler
TOOLS YOU WILL NEED:
Phillips head screwdriver
RS
te
CO
oO 9/16"and 1/4"nutdriver Phillips head 5/16'and 6" Adjustable
O 6" Adjustable wrench screwdriver 1/4'nutdriver wrench
O Level
O Carpenters square —\ ARE Co ( 0) Carpenters |
O Measuring tape * Square
O Safety glasses Measuring tape
O Flashlight
O Bucket to catch water when flushing the line
O Gloves
For New Installations Only:
O Tubing cutter
O Drill and appropriate bits
O Hole saw set Tubing cutter Drill and Bits
a Gloves
Hole saw set
é