Parts Supplied; Materials You Will Need; Tools You Will Need; Installation Preparation - GE PDT660SSFSS Installation Instructions Manual

PARTS SUPPLIED:

Four flat head wood screws
dishwasher to underside of countertop
(in literature package).
Screw type hose clamps and one drain hose.
@ 2 side mounting clips.
2 top mounting cl\ i ps.

MATERIALS YOU WILL NEED :

Ferrule, compression nut and 90° Elbow (3/8"NPT external
thread on one end, opposite end sized to fi t water supply)
Thread seal tape
UL Listed wire nuts (3)
Materials For New Installations Only:
Air gap for drain hose, if required
Waste tee for house plumbing, if applicable
Electrical cable or power cord, if applicable
Screw type hose clamps
Strain relief for electrical connection.
Hand shut-off valve
Water line 3/8" min. copper
Coupler for extending drain line, if applicable

TOOLS YOU WILL NEED:

Phillips head screwdriver
5/16" and 1/4" nutdriver
6" Adjustable wrench
Level
Carpenters square
Measuring tape
Safety glasses
Flashlight
Bucket to catch water when fl ushing the line
Gloves
For New Installations Only:
Tubing cutter
Drill and appropriate bits
Hole saw set

Installation Preparation

to secure
Phillips
Head
Screwdriver
Flashlight
Bucket
Gloves
2 Side
4 Wood Screws
Mounting Clips
Hand
Shut-Off
90° Elbow,
Valve
Ferrule and
Compression Nut
Electrical Cable
(or Power Cord, if applicable)
Waste Tee
Screw Type
Hose Clamps
Air Gap
1/4"
and 5/16" Nut-
driver
6" Adjustable
Wrench
Safety Glasses
Hole Saw Set
2
Screw Type
2 Top
Hose Clamp
Mounting Clips
Wire Nuts (3)
Thread
Seal Tape
Hot Water line
Strain Relief
Level
Carpenters
Square
Tubing Cutter
Measuring Tape
Drill and Bits
Drain Hose
Coupler