Parts Supplied; Materials You Will Need; Tools You Will Need; Installation Preparation - GE WX09X70910 Installation Instructions Manual

PARTS SUPPLIED:

Two #8 Phillips fl at head wood screws, 5/8" long
to secure dishwasher to underside of countertop
(in literature package).
Two Phillips head, color matched toekick screws
(in literature package).

MATERIALS YOU WILL NEED :

Ferrule, compression nut and 90° Elbow (3/8"NPT external
thread on one end, opposite end sized to fi t water supply)
Thread seal tape
UL Listed wire nuts (3)
Materials For New Installations Only:
Air gap for drain hose, if required
Waste tee for house plumbing, if applicable
Electrical cable or power cord, if applicable
Screw type hose clamps
Strain relief for electrical connection.
Hand shut-off valve
Water line 3/8" min. copper
Coupler for extending drain line, if applicable

TOOLS YOU WILL NEED:

Phillips head screwdriver
5/16" and 1/4" nutdriver
6" Adjustable wrench
Level
Carpenters square
Measuring tape
Safety glasses
Flashlight
Bucket to catch water when fl ushing the line
Gloves
For New Installations Only:
Tubing cutter
Drill and appropriate bits
Hole saw set

Installation Preparation

2 Wood Screws
90° Elbow,
Ferrule and
Compression Nut
Air Gap
Phillips
Head
Screwdriver
Flashlight
Bucket
Gloves
2
2 Color Matched
Toekick Screws
Hand
Shut-Off
Valve
Electrical Cable
(or Power Cord, if applicable)
Waste Tee
Screw Type
Hose Clamps
Level
1/4"
and 5/16" Nut-
driver
6" Adjustable
Wrench
Tubing Cutter
Safety Glasses
Hole Saw Set
Wire Nuts (3)
Thread
Seal Tape
Hot Water line
Coupler
Strain Relief
Carpenters
Square
Measuring Tape
Drill and Bits