Step 9 - Position Dishwasher Under Countertop; Step 10 - Level Dishwasher - GE Built-In Dishwasher Installation Instructions Manual

Built-in dishwasher
Hide thumbs Also See for Built-In Dishwasher:
Table of Contents

Advertisement

Available languages

Available languages

STEP 9 – POSITION DISHWASHER UNDER COUNTERTOP
dishwasher and not pinched or in contact with door
springs or other dishwasher components.
TIP: Check tub insulation blanket, if equipped. It should
be positioned so it is not bunched up or interfering with
door springs. Check by opening and closing the door.
Be careful not to dent front panel with knees or damage
countertop or cabinets with dishwasher parts.
STEP 10 – LEVEL DISHWASHER
IMPORTANT -
be level for proper dish rack operation and wash
performance.
Place level on
door and rack
track inside the
tub as shown to
check that the
dishwasher is
C h eck
level.
Lev e l
Front
to Back
Figure 16
Installation Instructions
Dishwasher Must
C h eck
Lev e l
Side
To Side
Do Not Push Against
Front Door Panel With
Knee. Damage to The
Door Panel Will Occur.
Figure 15
by adj u sting the
f o ur lev e ling legs
indiv i dually.
TIP: Pull lower rack out, about halfway . Check to
be sure the rack does not roll forward or back into
dishwasher . If the rack rolls in either direction, the
dishwasher must be leveled again.
correctly . Adjust leveling legs to align door to tub.
8
Reposition Dishwasher
by Grasping Both
Sides With Hands
Turn Legs
to Adj u st

Advertisement

Table of Contents
loading

Table of Contents